Soft-tissue injuries like strains and sprains are among the most common and costly workplace injuries. They affect muscles, tendons and ligaments and often require time off, restricted duties and ongoing treatment. The good news is that most strains and sprains can be prevented with planning, training and safe work habits. This toolbox talk covers practical steps for preventing strains and sprains on every shift.
A strain happens when a muscle or tendon is overstretched or torn, often from lifting, pushing, pulling or sudden movements. A sprain involves ligaments that support joints such as ankles, knees and wrists. Both injuries can be painful, slow to heal and likely to recur if not managed properly. In many workplaces, these injuries are so common that they are sometimes seen as “part of the job,” but they do not have to be.
Why preventing strains and sprains matters
Strains and sprains are a major driver of lost workdays and workers’ compensation costs. According to the U.S. Bureau of Labor Statistics, overexertion and bodily reaction, which includes lifting, pushing, pulling and repetitive motions, accounted for roughly 22% of all nonfatal workplace injuries and illnesses that required days away from work in 2020. These cases often involve back injuries and soft‑tissue damage from manual handling tasks.
Beyond the numbers, soft-tissue injuries impact productivity, morale and employee retention. Workers who are injured may experience chronic pain, reduced confidence and difficulty performing tasks they once did easily. Teams must adapt to short staffing, overtime and retraining. Focusing on preventing strains and sprains protects people and supports consistent operations.
Common causes of strains and sprains at work
Strains and sprains can occur in any industry, from offices to construction sites and warehouses. Some common causes include:
- Manual material handling
- Lifting loads that are too heavy or awkward
- Reaching, twisting or bending while lifting
- Carrying objects over long distances or up and down stairs
- Awkward postures
- Working with arms above shoulder height
- Prolonged bending, kneeling or squatting
- Reaching far in front or to the side instead of moving closer
- Repetitive motions
- Frequent reaching, gripping, typing or using tools
- High‑speed, repetitive production tasks
- Limited task variety or inadequate breaks
- Slips, trips and falls
- Slipping on wet or uneven surfaces
- Tripping over clutter, cords or materials
- Missteps on stairs, ladders or curbs
- Sudden or unexpected forces
- Being asked to “catch” a falling load
- Being pulled or pushed by equipment or materials
- Sudden movements to avoid hazards or falling objects
Recognizing these risk factors is the first step to preventing strains and sprains. Once hazards are identified, supervisors and workers can take practical steps to reduce the risk.
Planning tasks for preventing strains and sprains
Good planning reduces the need for high‑risk lifting and awkward postures. Before starting a job, take a moment to assess:
- What needs to be moved: weight, size, shape, fragility
- Where it needs to go: distance, height, obstacles, doorways
- How often the task is done: one time, daily, or all day long
- Who is available to help: team members, equipment operators
Whenever possible, eliminate or reduce manual handling by using mechanical aids such as dollies, pallet jacks, carts, hoists or conveyors. Organize work areas so frequently used items are stored between knee and shoulder height to minimize bending and overreaching. Break large deliveries into smaller, manageable loads instead of moving everything at once.
Safe lifting techniques for preventing strains and sprains
Not every lift can be avoided, but the way you lift and move loads can make a major difference. Key safe‑lifting practices include:
- Test the weight before lifting
- Gently push or lift a corner to assess how heavy or stable the load is
- If it is too heavy or awkward, get help or use equipment
- Plan the path
- Clear trip hazards such as cords, debris or loose materials
- Check for wet or uneven surfaces and adjust the route if needed
- Get a stable stance
- Place feet shoulder‑width apart with one foot slightly ahead
- Keep your balance centered and firm before lifting
- Keep the load close
- Hold the load close to your body at about waist height
- Avoid reaching out with extended arms while carrying weight
- Bend at the hips and knees, not the back
- Use your legs and hips to lower and raise the load
- Keep your back as straight and neutral as possible
- Avoid twisting
- Turn with your feet, not your torso
- Take small steps to pivot instead of twisting your spine
- Set the load down safely
- Lower the load in a controlled way using your legs
- Make sure fingers and toes are clear before placing it down
For team lifts, choose one person to give clear commands such as “lift,” “walk” and “set down.” Make sure everyone understands the plan and the path before lifting.
Ergonomics and workstation setup
Ergonomics focuses on fitting the job to the worker. Small adjustments in workstations can significantly reduce the risk of strains and sprains:
- Office and computer work
- Adjust chair height so feet are flat on the floor and knees are about level with hips
- Keep the top of the monitor at or slightly below eye level
- Position keyboard and mouse so elbows are close to the body and bent around 90 degrees
- Use a headset instead of cradling a phone between ear and shoulder
- Industrial, warehouse and field work
- Raise or lower work surfaces to keep tasks between knee and shoulder height where possible
- Use height‑adjustable tables, platforms or stands to bring work closer
- Store heavy items between mid‑thigh and chest height
- Rotate tasks to limit prolonged repetition and static postures
Regularly review workstations and ask workers where they feel strain or discomfort. Early adjustments often prevent injuries from developing.
Work practices for preventing strains and sprains
Daily habits and work practices are just as important as equipment and layout. Encourage the following:
- Warm up before physically demanding tasks
- Gentle stretching and range‑of‑motion exercises help prepare muscles and joints
- Focus on the back, shoulders, legs and wrists
- Pace work and take micro‑breaks
- Short, frequent breaks to change posture or stretch are more effective than long, infrequent breaks
- Vary tasks throughout the day when possible
- Use the right tool for the job
- Choose tools with comfortable grips that reduce excessive force
- Maintain tools so they work smoothly and do not require extra effort
- Wear appropriate footwear
- Use shoes or boots with good support and non‑slip soles
- Replace worn‑out footwear that no longer provides stability
- Report early signs of discomfort
- Speak up if you notice persistent soreness, tingling, weakness or restricted movement
- Early reporting allows adjustments to be made before an injury worsens
Supervisors should reinforce that early reporting is encouraged and will not be held against workers. Addressing discomfort early is a key part of preventing more serious strains and sprains.
Housekeeping and walking surfaces
Slips, trips and sudden missteps often cause sprains to ankles, knees and wrists. Good housekeeping and attention to walking surfaces can significantly reduce these injuries:
- Keep floors, walkways and stairs clear of clutter and materials
- Clean up spills immediately and use barriers or signs if surfaces remain wet
- Secure cords and hoses away from main walk paths
- Repair damaged flooring, loose mats or uneven transitions promptly
- Ensure adequate lighting in work areas, corridors and exterior paths
Everyone shares responsibility for reporting hazards and correcting them promptly wherever possible.
Training and continuous improvement
Preventing strains and sprains is an ongoing process. Regular training and refreshers help keep safe practices top of mind. Safety meetings and toolbox talks are an opportunity to:
- Review recent tasks or incidents and discuss how to reduce strain risks
- Demonstrate safe lifting, use of mechanical aids and ergonomic adjustments
- Encourage workers to share ideas for improving layout, storage and processes
Use incident reports, near misses and feedback to identify trends and target high‑risk tasks for redesign. Involving employees directly in finding solutions improves both safety and practicality.
When employers and workers work together to identify hazards, plan tasks, use equipment wisely and build safer habits, the risk of strains and sprains can be reduced significantly. Focusing on prevention protects health, supports productivity and creates a safer workplace for everyone.
Keep building on these habits with our resources on ergonomics and injury prevention, material handling beyond lifting, and musculoskeletal micro-trauma. Three Sixty Safety can also help you deliver hands-on safety training for your crews.
References
- U.S. Bureau of Labor Statistics – Nonfatal occupational injuries and illnesses data: https://www.bls.gov/iif/nonfatal-injuries-and-illnesses-tables.htm




